1) You may need to tighten your connection between the hose and the Water Saver with a pair of pliers or a 13 mm wrench.
2) Check that the gasket between the hose and the Water Saver is still present.
3) Check that mesh gasket is still present between the endring of the Water Saver and its body. Be careful not to lose any part while doing that.
4) If the leak is still present, use thread seal tape. Make a few turns with the ribbon around the net in the opposite direction to when you screw. You can then assemble the two pieces.
5) If nothing works, the issue can’t be solved without the help of a support person.
Please contact us using the formular below and we will help you as soon as possible.