1) Try to screw the hose without placing the connector between the hose and the water outlet.
2) If you managed to screw the connector, but don’t have the space to screw the hose, follow those steps:
- Slightly turn the hose screwed to the water inlet of the vacuum breaker (using pliers if necessary) so that one of its flat side is tangent to the water outlet of the vacuum breaker.
- Screw the new hose using pliers, you may need to use a little strength. Don’t forget to place the red gasket between the hose and the water outlet of the vacuum breaker. It might also touch and turn the hose of the water inlet. If so, don’t hesitate to adjuste its position so that it’s tangent again to the vacuum breaker water outlet.
- Tighten the connection between the hose and water inlet of the vacuum breaker.
- When you first try the Water Saver, check that there is no water leak from these connections.
3) If it doesn’t work, the issue can’t be solved without the help of a support person.
Please contact us using the formular below and we will help you as soon as possible.